Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pliers
- Tape measure
- Pipe cutter
Step-by-Step Installation
- Choose Installation Location: Select a location near water supply, drain, and electrical connections on a solid, level floor under counter.
- Remove Shipping Materials: Remove all shipping bolts and packaging materials from the dishwasher.
- Connect Water Supply: Connect hot water supply line to the water inlet valve. Use only new hoses and ensure proper sealing.
- Connect Drain Hose: Route the drain hose into sink drain or garbage disposal with a high loop to prevent backflow.
- Electrical Connection: Connect to a properly grounded 120V, 60Hz, AC only outlet. Dedicated circuit recommended.
- Level the Dishwasher: Adjust the leveling legs to ensure the dishwasher is level from front to back and side to side.
- Test Run: Run the dishwasher through a complete cycle to check for leaks and proper operation.
Warning: All installations must be performed by a qualified installer to ensure proper operation and maintain warranty coverage.