Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pliers
- Tape measure
Step-by-Step Installation
- Choose Installation Location: Select a location near necessary plumbing and electrical connections on a solid, level floor.
- Remove Shipping Materials: Remove all shipping bolts and packaging materials from the dishwasher.
- Connect Water Supply: Connect hot water supply line to the water inlet valve. Use only new hoses.
- Connect Drain Hose: Route the drain hose into a standpipe or garbage disposal with a high loop to prevent backflow.
- Electrical Connection: Connect to a properly grounded 120V, 60Hz, AC only outlet. Do not use an extension cord.
- Level the Dishwasher: Adjust the leveling legs to ensure the dishwasher is level from front to back and side to side.
- Test Run: Run the dishwasher through a complete cycle to check for leaks and proper operation.
Specifications
| Model Series | DW80CG4021SR |
| Type | Built-in Dishwasher |
| Color | Stainless Steel |
| Place Settings | 14 Place Settings |
| Noise Level | 44 dBA |
| Control Type | Touch Controls with LED Display |
| Energy Rating | Energy Star Certified |
| Water Consumption | 2.9 Gallons per Cycle |
| Power Requirements | 120V, 60Hz, 15A |
| Dimensions (HxWxD) | 33.875 x 23.75 x 24.5 inches |
| Weight | 95 lbs |
| Wash Cycles | 6 Wash Cycles |
Warranty Information
- Full Warranty: 1 year parts and labor
- Motor Warranty: 10 years on Direct Drive Motor
- Additional Coverage: Optional extended warranty available
For warranty service, contact Samsung Customer Service at 1-800-726-7864 or visit Samsung.com
Key Features
StormWash™
Powerful multi-directional spray arms target every corner of the dishwasher to remove tough, baked-on food particles.
WaterWall™ Technology
Revolutionary technology that moves a wall of water across the bottom rack for complete coverage and superior cleaning performance.
Zone Booster™
Focuses extra cleaning power on specific areas where dishes need it most, perfect for heavily soiled pots and pans.
Third Rack
Additional top rack provides extra space for utensils and small items, maximizing loading capacity and organization.
FlexLoad™ Adjustable Racks
Adjustable upper rack with fold-down tines provides flexibility to accommodate tall items and various dish sizes.
Quiet Operation
Advanced sound insulation and vibration reduction technology ensures quiet operation at only 44 dBA.
Wash Cycle Options
Heavy
Intensive cleaning for heavily soiled pots, pans, and dishes
Normal
Standard cleaning for everyday dishes with normal soil levels
Light
Gentle cycle for lightly soiled dishes and quick washes
Rinse Only
Rinses dishes without detergent to prevent drying of food particles
Delay Start
Delays cycle start time from 1 to 24 hours for energy savings
Sanitize
High-temperature wash that eliminates 99.9% of bacteria
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dishwasher won't start | Power issue, door not closed properly | Check power supply, ensure door is latched completely |
| Poor cleaning results | Overloading, wrong detergent, incorrect program | Reduce load size, use correct detergent, select appropriate program |
| Water not draining | Drain hose clogged or kinked | Check drain hose for obstructions or kinks, clean filter |
| Leaking water | Door not sealed, overfilling, loose connections | Check door seal, ensure proper detergent amount, check connections |
| Unusual noises | Foreign objects in spray arms, unbalanced load | Check for foreign objects, redistribute load evenly |
| Error codes displayed | Various system malfunctions | Refer to error code section below for specific reset procedures |
How to Reset Samsung Dishwasher DW80CG4021SR
Soft Reset Method:
- Press and hold the "Heated Dry" and "High Temp Wash" buttons simultaneously for 3 seconds
- Wait for the control panel to beep and all lights to flash once
- Release the buttons and wait 30 seconds for the dishwasher to reset
- Close and reopen the door to complete the reset process
Hard Reset Method:
- Turn off the circuit breaker that powers the dishwasher for 5 minutes
- Turn the circuit breaker back on
- Wait 2 minutes for the dishwasher to initialize
- Start a new cycle to test operation
Error Codes
- LC: Water leak detected - Check for leaks and reset
- OE: Drain issue - Check drain hose and pump
- IE: Water supply issue - Check water supply and inlet valve
- FE: Flooding detected - Check for leaks and water supply
- LE: Motor issue - Contact service center
- dE: Door not closed properly - Ensure door is fully closed
Manual Downloads
Current Model Manuals
DW80CG4021SR
14 Place Settings Dishwasher
DW80CG4021UB
Black Stainless Dishwasher
DW80CG4021WS
White Dishwasher
DW80CG4021BB
Black Dishwasher
Popular Previous Models
DW80R9950US
15 Place Settings Dishwasher
DW80R5061US
Stainless Steel Dishwasher
DW80K7050US
Smart Dishwasher
DW80J3020US
Standard Dishwasher