Samsung Bespoke AI Washer Dryer

User Manual & Installation Guide

AI-Powered Laundry Center

Installation Guide

Tools Needed:

  • Adjustable wrench
  • Level
  • Screwdrivers (flat and Phillips)
  • Pliers
  • Tape measure
  • Pipe cutter

Step-by-Step Installation

  1. Choose Installation Location: Select a location near necessary plumbing and electrical connections on a solid, level floor with proper ventilation.
  2. Remove Shipping Materials: Remove all shipping bolts and packaging materials from both washer and dryer units.
  3. Connect Water Supply: Connect hot and cold water supply lines to the water inlet valves. Use only new hoses provided.
  4. Connect Drain System: Route the drain hose into a standpipe with a high loop to prevent backflow and siphoning.
  5. Ventilation Setup: Install proper exhaust venting for dryer unit according to local building codes.
  6. Electrical Connection: Connect to a properly grounded 240V, 60Hz outlet for dryer and 120V for washer. Do not use extension cords.
  7. Level the Unit: Adjust the leveling legs to ensure the unit is perfectly level from front to back and side to side.
  8. Test Run: Run both washer and dryer through complete cycles to check for leaks and proper operation.
Warning: All installations must be performed by a qualified installer to ensure proper operation and maintain warranty coverage.

Specifications

Model Series WF-AD9000T
Type Front Load Washer Dryer Combo
Color Options Customizable Bespoke Panels
Washer Capacity 5.0 cu. ft.
Dryer Capacity 7.5 cu. ft.
Noise Level (Wash/Dry) 48 dB / 62 dB
Control Type AI Touch Controls with LCD Display
Energy Rating ENERGY STARĀ® Most Efficient 2024
Water Consumption 12 gallons per cycle
Power Requirements 240V/120V, 60Hz, 30A
Dimensions (HxWxD) 74 x 27 x 32 inches
Weight 205 lbs
Max Spin Speed 1400 RPM

Warranty Information

  • Full Warranty: 2 years parts and labor
  • Motor Warranty: 20 years on AI Direct Drive Motor
  • Additional Coverage: 1 year in-home service

For warranty service, contact Samsung Customer Service at 1-800-SAMSUNG or visit Samsung.com

Key Features

AI Optimal Wash

Samsung's AI technology automatically detects fabric types and soil levels to optimize wash cycles for perfect cleaning results every time.

Super Speed Wash

Complete a full load of laundry in just 28 minutes using powerful water jets and optimized drum motions without compromising cleaning performance.

AI Energy Mode

Intelligent energy management system reduces power consumption by up to 20% while maintaining optimal drying performance.

Bespoke Design

Customizable front panels allow you to match your laundry unit to your home's decor with various color and finish options.

SmartThings Integration

Wi-Fi enabled for complete remote control via SmartThings app, including cycle monitoring, diagnostics, and software updates.

Sanitize+ Cycle

Eliminates 99.9% of bacteria and allergens using steam technology and high-temperature washing for hygienically clean laundry.

AI Wash Technology Explained

Fabric Recognition

AI camera and sensors identify fabric types and recommend optimal wash settings

Soil Detection

Advanced sensors detect soil levels and adjust water temperature and cycle time accordingly

Smart Drying

Moisture sensors prevent over-drying and reduce energy consumption

Auto Dispense

Automatically dispenses the perfect amount of detergent and fabric softener

Cycle Learning

AI learns your laundry preferences and suggests optimized cycles over time

Remote Diagnostics

Smart diagnostics can identify issues and suggest solutions before they become problems

Troubleshooting

Problem Possible Cause Solution
Unit won't start Power issue, door not closed properly, child lock engaged Check power supply, ensure door is latched, disable child lock
Poor cleaning results Overloading, wrong detergent, AI sensor error Reduce load size, use HE detergent, clean AI sensors
Water not draining Drain hose clogged, pump filter blocked Check drain hose for obstructions, clean pump filter
Clothes not drying Lint filter clogged, venting issue, overloaded Clean lint filter, check vent system, reduce load size
AI features not working Wi-Fi disconnected, software update needed Check internet connection, update SmartThings app
Unusual noises Foreign objects in drum, unbalanced load Check for foreign objects, redistribute load evenly

Error Codes

  • 4E/5E: Water supply issue - Check water supply and inlet valve
  • 3E/9E: Drain issue - Check drain hose and pump
  • 1E/2E: Motor issue - Contact service center
  • dE/dC: Door not closed properly - Ensure door is fully closed
  • UE/oE: Unbalanced load - Redistribute clothes and restart
  • tE/tC: Temperature sensor error - Contact service center

Manual Downloads

Current Model Manuals

WF-AD9000T

Bespoke AI Washer Dryer Combo

WF-AD8500T

Bespoke AI Washer Only

DV-AD9000T

Bespoke AI Dryer Only

WF-AD7000T

Bespoke Compact Combo

Popular Previous Models

WF45R6300AW

4.5 cu. ft. AI Washer

DVE45R6300W

7.3 cu. ft. Electric Dryer

WF50R8500AV

5.0 cu. ft. Smart Washer

DV50R8500EV

7.5 cu. ft. Smart Dryer

Note: For models not listed here, please visit the Samsung Support Website for complete documentation.