Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pliers
- Tape measure
- Pipe thread seal tape
Step-by-Step Installation
- Choose Installation Location: Select a location near necessary plumbing and electrical connections on a solid, level floor with proper clearance.
- Remove Shipping Materials: Remove all shipping bolts and packaging materials from the dishwasher.
- Connect Water Supply: Connect hot water supply line to the water inlet valve. Use only new hoses and apply pipe thread seal tape.
- Connect Drain Hose: Route the drain hose into a standpipe or garbage disposal with a high loop to prevent backflow.
- Electrical Connection: Connect to a properly grounded 120V, 60Hz, AC only outlet. Do not use an extension cord.
- Level the Dishwasher: Adjust the leveling legs to ensure the dishwasher is level from front to back and side to side.
- Test Run: Run the dishwasher through a complete cycle to check for leaks and proper operation.
Specifications
| Model Series | DW80N3030US |
| Type | Built-in Dishwasher |
| Color | Stainless Steel / Black |
| Place Settings | 14 place settings |
| Noise Level | 48 dB |
| Control Type | Electronic Controls with LED Display |
| Energy Rating | ENERGY STAR® Certified |
| Water Consumption | 2.9 gallons per cycle |
| Power Requirements | 120V, 60Hz, 15A |
| Dimensions (HxWxD) | 33.875 x 23.75 x 24.5 inches |
| Weight | 75 lbs |
| Wash Cycles | 6 wash cycles |
Warranty Information
- Full Warranty: 1 year parts and labor
- Motor Warranty: 5 years on wash motor
- Additional Coverage: Optional extended warranty available
For warranty service, contact Samsung Customer Service at 1-800-726-7864 or visit Samsung.com
Key Features
StormWash™
Powerful multi-directional spray arms provide complete coverage, removing tough, baked-on food from every angle for spotless cleaning results.
FlexLoad™
Adjustable upper rack with customizable configurations to accommodate tall items like stemware and large platters while maximizing loading capacity.
WaterWall™ Technology
Advanced cleaning technology that moves a powerful wall of water across every rack, ensuring thorough cleaning of every dish from top to bottom.
Heavy Duty Cycle
Intensive cleaning cycle designed to remove tough, baked-on food from pots, pans, and heavily soiled dishes with high-temperature washing.
Sanitize Cycle
NSF certified cycle that eliminates 99.9% of food soil bacteria using high-temperature water to ensure dishes are hygienically clean.
Delay Start
Program the dishwasher to start at a later time, allowing you to take advantage of off-peak energy hours or have clean dishes ready when needed.
Wash Cycles Explained
Normal
Standard cycle for everyday dishes with normal soil levels
Heavy
Intensive cleaning for pots, pans and heavily soiled items
Light
Quick cycle for lightly soiled dishes with shorter run time
Rinse Only
Brief rinse cycle to prevent food from drying on dishes
Sanitize
High-temperature cycle that eliminates 99.9% of bacteria
Delay Start
Program cycle to begin at specified later time
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dishwasher won't start | Power issue, door not closed properly | Check power supply, ensure door is latched completely |
| Poor cleaning results | Overloading, wrong detergent, incorrect loading | Reduce load size, use correct detergent, load dishes properly |
| Water not draining | Drain hose clogged or kinked | Check drain hose for obstructions or kinks, clean filter |
| Leaking water | Door not sealed, overfilling, loose connections | Check door seal, ensure proper detergent amount, check connections |
| Unusual noises | Foreign objects in pump, spray arm obstruction | Check for foreign objects, ensure spray arms rotate freely |
| Dishes not drying | Rinse aid empty, water temperature too low | Refill rinse aid, check water heater temperature setting |
Error Codes
- 4C: Water supply issue - Check water supply and inlet valve
- 5C: Drain issue - Check drain hose and pump
- LC: Leak detected - Check for leaks and water supply
- OC: Overcurrent detected - Contact service center
- dC: Door not closed properly - Ensure door is fully closed
- FC: Communication error - Power cycle dishwasher
Manual Downloads
Current Model Manuals
DW80N3030US
Built-in Dishwasher with StormWash
DW80R5060US
Stainless Steel Dishwasher
DW80R9950UT
Smart Dishwasher with Wi-Fi
DW80M2020US
Black Stainless Dishwasher
Popular Previous Models
DW80J3020US
Stainless Steel Dishwasher
DW80K5050US
Built-in Dishwasher
DW80R7060US
Stainless Steel with WaterWall
DW80M2020US
Black Stainless Steel