samsung dishwasher troubleshooting manual reset

User Manual & Reset Guide

Dishwasher Reset Procedures

Reset Methods

Tools Needed:

  • Soft cloth
  • Flashlight
  • Multimeter (optional)
  • Safety gloves

Step-by-Step Reset Procedures

  1. Power Cycle Reset: Unplug the dishwasher from power outlet for 5 minutes, then plug back in to reset the control board.
  2. Button Combination Reset: Press and hold the "Heated Dry" and "High Temp Wash" buttons simultaneously for 3-5 seconds until lights flash.
  3. Circuit Breaker Reset: Turn off the circuit breaker for 10 minutes, then restore power to completely reset the system.
  4. Control Lock Reset: Press and hold "Delay Start" button for 3 seconds to disable/enable control lock feature.
  5. Factory Reset: Press "Normal" and "Heated Dry" for 8 seconds until all lights illuminate, then release to restore factory settings.
  6. Drain Reset: Cancel current cycle, press and hold "Cancel/Drain" for 3 seconds to reset drain system.
  7. Water Supply Reset: Check water supply valve, ensure it's fully open and water pressure is adequate.
Warning: Always disconnect power before performing any reset procedures. Consult professional technician if problems persist after reset attempts.

Error Codes

Model Series DW80R9950 Series
Type Built-in Dishwasher
Control Type Touch Controls with LED Display
Reset Method Multiple Procedures Available

Common Error Codes and Reset Procedures

  • LC/LE: Water leak detected - Reset by power cycling and checking water connections
  • OE: Drain issue - Reset drain system and check drain hose
  • IE: Water inlet error - Reset water supply and check inlet valve
  • HE: Heating error - Reset heating system and check heating element
  • CE: Communication error - Full power reset required
  • dE/dC: Door not closed properly - Reset door latch mechanism

For persistent error codes, contact Samsung Customer Service at 1-800-726-7864 or visit Samsung.com

Common Issues

Dishwasher Won't Start

Power supply issues, control lock activated, or door not properly closed. Perform power cycle reset and check door alignment.

Water Not Draining

Drain hose clogged, drain pump issues, or filter blockage. Reset drain system and clean filters thoroughly.

Poor Cleaning Results

Spray arm obstruction, improper loading, or water temperature issues. Reset wash cycle and check spray arm rotation.

Unusual Noises

Foreign objects in pump, spray arm issues, or motor problems. Reset and inspect for obstructions in the tub.

Control Panel Not Responding

Control lock activated or electronic control board issues. Perform factory reset and check power supply.

Water Leaking

Door seal issues, hose connections, or overfilling. Reset water system and inspect all seals and connections.

Reset Sequence Guide

Basic Reset

Power cycle for minor issues and temporary glitches

Soft Reset

Button combination reset for control panel issues

Hard Reset

Circuit breaker reset for persistent electronic problems

Factory Reset

Complete system restore for major malfunctions

Component Reset

Individual system resets for specific error codes

Maintenance Reset

Reset after cleaning and maintenance procedures

Preventive Maintenance

Maintenance Task Frequency Reset Required
Clean Filters Monthly Drain System Reset
Check Spray Arms Quarterly Wash Cycle Reset
Inspect Door Seal 6 Months Door Mechanism Reset
Clean Drain Hose Annually Full System Reset
Check Water Connections Annually Water System Reset
Update Software As Available Factory Reset Recommended

Maintenance Reset Procedures

  • Filter Cleaning Reset: After cleaning filters, run a quick rinse cycle to reset filter monitoring system
  • Descaling Reset: After descaling, run a hot water cycle to reset water quality monitoring
  • Drain Maintenance Reset: After drain cleaning, reset drain counter in service menu
  • Seal Replacement Reset: After door seal replacement, reset door closure monitoring system
  • Spray Arm Reset: After spray arm maintenance, reset water distribution calibration
  • General Maintenance Reset: Complete system reset after major maintenance procedures

Manual Downloads

Current Model Manuals

DW80R9950

StormWash™ Dishwasher

DW80R5060

Smart Control Dishwasher

DW80M2020

Third Rack Dishwasher

DW80R5010

Standard Dishwasher

Troubleshooting Guides

Reset Procedures

Complete Reset Guide

Error Codes

Error Code Reference

Maintenance

Preventive Maintenance

Installation

Installation Manual

Note: For models not listed here, please visit the Samsung Support Website for complete documentation and reset procedures.