Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pliers
- Tape measure
- Gas leak detector (for gas models)
Step-by-Step Installation
- Choose Installation Location: Select a well-ventilated area near electrical/gas connections on a solid, level floor with proper clearance.
- Remove Shipping Materials: Remove all shipping bolts, brackets and packaging materials from the dryer.
- Ventilation Setup: Install 4-inch diameter metal venting to outdoors. Avoid sharp bends and long vent runs.
- Gas Connection (Gas Models): Connect to gas supply using approved flexible connector. Check for leaks with detector solution.
- Electrical Connection: Connect to properly grounded 240V, 60Hz outlet for electric models. Gas models require 120V outlet.
- Level the Dryer: Adjust the leveling legs to ensure the dryer is level from front to back and side to side.
- Test Run: Run the dryer through a complete cycle to check for proper operation, heating and ventilation.
Specifications
| Model Series | DV90T8240 |
| Type | Heat Pump Dryer |
| Color | Black Stainless Steel / White |
| Capacity | 9 kg |
| Noise Level | 62 dB |
| Control Type | LED Touch Display with EcoBubble™ |
| Energy Rating | A+++ (Most Efficient) |
| Moisture Sensor | Advanced 4-point sensing system |
| Power Requirements | 220-240V, 50Hz, 16A |
| Dimensions (HxWxD) | 85 x 60 x 62 cm |
| Weight | 71 kg |
| Heat Pump Technology | Inverter Heat Pump |
Warranty Information
- Full Warranty: 2 years parts and labor
- Motor Warranty: 20 years on Digital Inverter Motor
- Heat Pump Warranty: 10 years on heat pump system
- Additional Coverage: Optional extended warranty available
For warranty service, contact Samsung Customer Service at 1-800-SAMSUNG or visit Samsung.com
Key Features
MultiSteam Technology
Steam refresh cycles remove wrinkles and odors from clothes, reducing ironing time and keeping clothes fresh between washes.
Moisture Sensor Dry
Advanced 4-point moisture sensing automatically detects when clothes are dry and stops the cycle, preventing over-drying and saving energy.
SmartThings Connectivity
Wi-Fi enabled for remote monitoring and control via smartphone app, receive notifications and download additional drying programs.
Heat Pump Technology
Energy-efficient heat pump system recycles hot air, using up to 50% less energy compared to conventional dryers while being gentle on fabrics.
Digital Inverter Motor
Brushless digital inverter motor provides quiet operation, enhanced durability and 20-year warranty for long-lasting performance.
EcoBubble™ Technology
Creates bubbles that penetrate fabric quickly at low temperatures, ensuring effective cleaning while being gentle on clothes.
Drying Programs Explained
Cotton Dry
Standard drying for cotton fabrics with adjustable dryness levels
Mixed Load
Automatic drying for mixed fabric types in one load
Delicates
Gentle low-temperature drying for delicate fabrics
Time Dry
Manual time-based drying with adjustable duration
Steam Refresh
Steam cycle to remove wrinkles and refresh clothes
Quick Dry
Rapid drying for small loads in reduced time
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dryer won't start | Power issue, door not closed properly, start button not pressed | Check power supply, ensure door is latched, press and hold start button |
| Clothes not drying | Overloading, lint filter clogged, vent blocked | Reduce load size, clean lint filter, check vent system |
| Long drying times | Heavy loads, high humidity, restricted airflow | Split large loads, ensure proper ventilation, check venting |
| Unusual noises | Foreign objects in drum, worn rollers/belt | Check for foreign objects, contact service if noise persists |
| Error codes displayed | Sensor issues, heating problems, communication errors | Refer to error code list, reset dryer, contact service if needed |
| Steam not working | Water supply issue, steam generator problem | Check water connection, ensure steam setting selected |
Error Codes
- tE: Temperature sensor error - Check sensors, contact service
- HE: Heating issue - Check heating system, ensure proper ventilation
- dE: Door not closed properly - Ensure door is fully closed and latched
- LE: Motor issue - Contact service center
- FE: Water supply issue for steam - Check water connection
- CE: Communication error - Reset dryer, check SmartThings connection
Manual Downloads
Current Model Manuals
DV90T8240
9kg Heat Pump Dryer with Steam
DV90T8240S
9kg SmartThings Dryer
DV90T8240W
9kg White Heat Pump Dryer
DV90T8240B
9kg Black Stainless Dryer
Popular Previous Models
DV90M5200
9kg Heat Pump Dryer
DV90N8377
9kg Smart Dryer
DV80M2020
8kg Sensor Dryer
DV70M5020
7kg Eco Dryer