Samsung SmartThings Dishwasher

Installation Manual & User Guide

SmartThings Enabled

Installation Guide

Tools Needed:

  • Adjustable wrench
  • Level
  • Screwdrivers (flat and Phillips)
  • Pipe cutter
  • Tape measure
  • Electrical tester

Step-by-Step Installation

  1. Choose Installation Location: Select a location near kitchen plumbing and electrical connections on a solid, level floor under countertop.
  2. Remove Shipping Materials: Remove all shipping bolts and packaging materials from the dishwasher.
  3. Connect Water Supply: Connect hot water supply line to the water inlet valve. Use only new braided stainless steel hoses.
  4. Connect Drain Hose: Route the drain hose into sink drain or garbage disposal with a high loop to prevent backflow.
  5. Electrical Connection: Connect to a dedicated 120V, 60Hz, 15A circuit with proper grounding. Do not use an extension cord.
  6. Level the Dishwasher: Adjust the leveling legs to ensure the dishwasher is level from front to back and side to side.
  7. Secure to Countertop: Use mounting brackets to secure the dishwasher to the underside of the countertop.
  8. Test Run: Run the dishwasher through a complete cycle to check for leaks and proper operation.
Warning: All installations must be performed by a qualified installer to ensure proper operation and maintain warranty coverage.

Specifications

Model Series DW80R9950UG
Type Built-in Dishwasher
Color Stainless Steel / Black
Place Settings 15 place settings
Noise Level 39 dBA
Control Type Touch Controls with LCD Display
Energy Rating ENERGY STAR® Certified
Water Consumption 2.9 gallons per cycle
Power Requirements 120V, 60Hz, 15A
Dimensions (HxWxD) 33.875 x 23.75 x 24.5 inches
Weight 125 lbs
Drying System Heat Exchange Drying

Warranty Information

  • Full Warranty: 1 year parts and labor
  • Motor Warranty: 10 years on Direct Drive Motor
  • Additional Coverage: Optional extended warranty available

For warranty service, contact Samsung Customer Service at 1-800-SAMSUNG or visit Samsung.com

Key Features

SmartThings Connectivity

Connect your dishwasher to your home Wi-Fi network for remote control, cycle monitoring, and smart home integration through the SmartThings app.

WaterWall™ Technology

Revolutionary cleaning system that moves water in a powerful wall-like motion across every rack for superior cleaning performance.

Zone Booster

Focuses extra cleaning power on specific zones for heavily soiled pots, pans, and dishes while saving energy on lightly soiled items.

StormWash™

Multi-motion spray arm with 38 powerful jets that targets every corner of the dishwasher for complete coverage and superior cleaning.

AutoRelease Door

Automatically opens the door at the end of the cycle to release steam and improve drying performance naturally.

Third Rack

Extra rack designed specifically for cutlery and utensils, providing more loading capacity and better organization.

Smart Features Explained

Remote Start

Start cycles remotely using the SmartThings app from anywhere

Cycle Monitoring

Monitor cycle progress and receive completion alerts on your phone

Voice Control

Compatible with Alexa and Google Assistant for voice commands

Energy Monitoring

Track energy and water usage through the SmartThings app

Diagnostic Alerts

Receive maintenance alerts and troubleshooting notifications

Software Updates

Automatic software updates for improved performance and new features

Troubleshooting

Problem Possible Cause Solution
Dishwasher won't start Power issue, door not closed properly Check power supply, ensure door is latched completely
Poor cleaning results Overloading, wrong detergent, incorrect program Reduce load size, use correct detergent, select appropriate program
Water not draining Drain hose clogged or kinked Check drain hose for obstructions or kinks, clean filter
Leaking water Door not sealed, overfilling, loose connections Check door seal, ensure proper detergent amount, check connections
Unusual noises Foreign objects in spray arms, unbalanced load Check for foreign objects, redistribute load evenly
Dishes not drying Rinse aid empty, improper loading, heating element issue Refill rinse aid, check loading pattern, verify heating element

Error Codes

  • IE: Water supply issue - Check water supply and inlet valve
  • OE: Drain issue - Check drain hose and pump
  • FE: Flooding detected - Check for leaks and water supply
  • LE: Motor issue - Contact service center
  • dE: Door not closed properly - Ensure door is fully closed
  • HE: Heating element issue - Contact service center

Manual Downloads

Current Model Manuals

DW80R9950UG

SmartThings Dishwasher

DW80R7060UG

SmartThings Dishwasher

DW80R5010UG

SmartThings Dishwasher

DW80M2020UG

SmartThings Dishwasher

Popular Previous Models

DW80R5060US

Smart Control Dishwasher

DW80R2030US

WiFi Dishwasher

DW80J3020US

Smart Dishwasher

DW80F600UT

Connected Dishwasher

Note: For models not listed here, please visit the Samsung Support Website for complete documentation.