Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pliers
- Tape measure
- Pipe thread tape
Step-by-Step Installation
- Choose Installation Location: Select a location near necessary plumbing and electrical connections on a solid, level floor with proper ventilation for dryer.
- Remove Shipping Materials: Remove all shipping bolts and packaging materials from both washer and dryer units.
- Connect Water Supply: Connect hot and cold water supply lines to the washer water inlet valves. Use only new hoses with thread tape.
- Connect Drain Hose: Route the washer drain hose into a standpipe or laundry tub with a high loop to prevent backflow.
- Ventilation Setup: Install proper ventilation ducting for the dryer, ensuring minimal bends and proper exhaust to outdoors.
- Electrical Connection: Connect washer to grounded 120V outlet and dryer to dedicated 240V outlet. Do not use extension cords.
- Level the Units: Adjust the leveling legs to ensure both washer and dryer are level from front to back and side to side.
- Test Run: Run both units through complete cycles to check for leaks, proper operation, and ventilation.
Specifications
Washer Specifications
| Model Series | WW90TA046AX |
| Type | Front Load Washing Machine |
| Color | Titanium / White |
| Capacity | 9.5 kg |
| Noise Level (Wash/Spin) | 52 dB / 68 dB |
| Control Type | Digital Inverter Touch Controls |
| Energy Rating | A+++ (Most Efficient) |
| Water Consumption | 9,200 L/year |
| Power Requirements | 230V, 50Hz, 10A |
| Dimensions (HxWxD) | 85 x 60 x 55 cm |
| Weight | 71 kg |
| Max Spin Speed | 1400 RPM |
Dryer Specifications
| Model Series | DV90TA046AX |
| Type | Heat Pump Dryer |
| Color | Titanium / White |
| Capacity | 8 kg |
| Noise Level | 65 dB |
| Control Type | Digital Touch Controls |
| Energy Rating | A++ |
| Power Requirements | 230V, 50Hz, 10A |
| Dimensions (HxWxD) | 85 x 60 x 62 cm |
| Weight | 58 kg |
| Technology | Heat Pump with Moisture Sensor |
Warranty Information
- Full Warranty: 2 years parts and labor for both units
- Motor Warranty: 10 years on Digital Inverter Motor
- Heat Pump Warranty: 5 years on dryer heat pump system
- Additional Coverage: Optional extended warranty available
For warranty service, contact Samsung Customer Service at 1-800-726-7864 or visit Samsung.com
Key Features
Digital Inverter Motor
Samsung's Digital Inverter Motor uses strong magnets for powerful, quiet, and energy-efficient operation with fewer moving parts for enhanced durability and reliability.
EcoBubble™ Technology
Creates powerful bubbles that penetrate fabrics quickly at low temperatures, providing effective cleaning while being gentle on clothes and saving energy.
AddWash™ Door
Convenient secondary door allows you to add forgotten items at any time during the wash cycle without stopping the machine or losing water.
Heat Pump Drying
Advanced heat pump technology recycles hot air to dry clothes efficiently at lower temperatures, protecting fabrics and reducing energy consumption by up to 50%.
Smart Control
Wi-Fi enabled for remote control via SmartThings app, allowing you to monitor cycle status, download additional programs, and receive completion alerts.
Self Clean+
Automatically cleans the drum and removes moisture from hidden areas to prevent mold and mildew, keeping your washer fresh and hygienic.
Advanced Washing Programs
Super Speed
Washes a full load in just 39 minutes while maintaining excellent cleaning performance
Steam Wash
Uses steam to remove tough stains and allergens while reducing wrinkles
Woolmark Certification
Specially designed program for wool care that maintains fabric quality
Baby Care
Hygienic steam cycle that removes bacteria and allergens from baby clothes
Smart Check
Automatically diagnoses issues and provides troubleshooting guidance
Delay End
Set your wash to finish at a specific time that suits your schedule
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Washer won't start | Power issue, door not closed properly, child lock activated | Check power supply, ensure door is latched, check child lock settings |
| Dryer not heating | Lint filter clogged, ventilation blocked, thermal fuse blown | Clean lint filter, check ventilation, contact service if fuse issue |
| Water not draining | Drain hose clogged or kinked, pump filter blocked | Check drain hose for obstructions, clean pump filter |
| Leaking water | Door not sealed, overfilling, loose connections, damaged seal | Check door seal, ensure proper detergent amount, check connections |
| Unusual noises | Foreign objects in drum, unbalanced load, worn bearings | Check for foreign objects, redistribute load evenly, contact service |
| Clothes too wet after spin | Overloaded, unbalanced load, incorrect spin speed selected | Reduce load size, redistribute load, select higher spin speed |
Error Codes
- 4E/5E: Water supply issue - Check water supply and inlet valve
- 3E/9E: Drain issue - Check drain hose and pump
- 1E/UE: Unbalanced load - Redistribute clothes and restart
- HE/LE: Motor issue - Contact service center
- dE/dC: Door not closed properly - Ensure door is fully closed
- tE/tC: Temperature sensor error - Contact service center
Manual Downloads
Current Model Manuals
WW90TA046AX
9.5kg AI Control Washer
DV90TA046AX
8kg Heat Pump Dryer
WW80TA046AE
8kg EcoBubble Washer
DV80TA046AE
8kg Sensor Dryer
Popular Previous Models
WW10N644RBX
10.5kg AddWash Washer
DV90N64636W
9kg Heat Pump Dryer
WW90J5475FX
9kg QuickDrive Washer
DV90M5200QW
9kg Condenser Dryer