Installation Guide
Service Tools Required:
- Multimeter
- Torx screwdriver set
- Hex key set
- Nut drivers
- Service software diagnostic tool
Service Installation Procedure
- Unit Placement: Ensure proper clearance for service access - minimum 4 inches on all sides for maintenance.
- Remove Transport Materials: Remove all shipping bolts and transit brackets from both washer and dryer sections.
- Water Connection Check: Verify water inlet valve connections and pressure (20-116 psi).
- Drain System Setup: Install drain hose with proper height (minimum 24 inches) to prevent siphoning.
- Electrical Verification: Confirm 120V, 60Hz dedicated circuit with proper grounding. Test voltage stability.
- Leveling Procedure: Adjust front leveling feet to ensure unit is level within 1 degree.
- Diagnostic Test Run: Execute service test mode to verify all functions and check for error codes.
Technical Specifications
| Model Series | WF45T6000AW/A5 |
| Type | Front Load Washer Dryer Combo |
| Finish | Brushed Black Stainless / White |
| Washer Capacity | 4.5 cu. ft. |
| Dryer Capacity | 7.4 cu. ft. |
| Noise Level (Operation) | 68 dB / 72 dB |
| Control Interface | LED Touch Display with Smart Control |
| Energy Rating | ENERGY STAR® Most Efficient |
| Water Consumption | 13.5 gallons per cycle |
| Power Requirements | 120V, 60Hz, 15A |
| Dimensions (HxWxD) | 74 x 27 x 32.5 inches |
| Weight | 185 lbs |
| Max Spin Speed | 1300 RPM |
Warranty & Service Information
- Manufacturer Warranty: 1 year parts and labor
- Motor Warranty: 10 years on Direct Drive Motor
- Service Coverage: Optional Samsung Care+ available
For technical service support, contact Samsung Service at 1-800-SAMSUNG or visit SamsungService.com
System Features
EcoBubble™ Technology
Samsung's EcoBubble technology mixes water, air, and detergent to create powerful bubbles that penetrate fabrics quickly for effective cleaning at lower temperatures.
AddWash™ Door
The innovative AddWash door allows users to add forgotten items mid-cycle without stopping the wash, enhancing convenience and flexibility.
VRT Plus™ Technology
Vibration Reduction Technology Plus uses advanced sensors and counterweights to minimize vibration and noise during high-speed spin cycles.
Steam Sanitize+
Steam technology removes up to 99.9% of bacteria and allergens from fabrics, providing hygienic cleaning without harsh chemicals.
Smart Care
Wi-Fi enabled diagnostics allow remote troubleshooting and service scheduling through the Samsung Smart Care app.
Super Speed
Wash a full load in just 36 minutes while maintaining excellent cleaning performance through optimized water flow and drum motion.
Sensor Dry Technology
Moisture Sensor
Automatically detects moisture levels and adjusts drying time for optimal results and energy efficiency
Temperature Control
Maintains precise temperature control to protect delicate fabrics and prevent overheating
Wrinkle Care
Gentle tumbling at the end of cycle to prevent wrinkles from setting in fabrics
Auto Clean
Self-cleaning system for the lint filter and drum to maintain optimal performance
Eco Dry
Energy-saving drying mode that uses lower temperatures for longer-lasting clothes
Quick Dry
Rapid drying cycle for small loads or lightly damp items
Troubleshooting
| Service Issue | Diagnostic Code | Service Procedure |
|---|---|---|
| Unit fails to power on | PE, 3E | Check main power supply, test control board voltage, inspect door switch |
| Water filling error | 4E, 5E | Test water inlet valves, check pressure sensor, verify water supply |
| Drain system failure | 1E, 9E | Inspect drain pump, check for obstructions, test pump motor |
| Heating system fault | tE, HE | Test heating element, check thermal fuses, verify temperature sensors |
| Motor control error | UE, LE | Diagnose motor controller, check wiring harness, test motor windings |
| Sensor communication failure | SE, CE | Check sensor connections, test sensor voltages, replace faulty sensors |
Service Error Codes
- 1E/4E: Water supply issue - Check inlet valve and water pressure
- 3E/5E: Drain error - Inspect drain pump and hose
- 9E/tE: Heating system fault - Test heating elements and thermostats
- UE/LE: Motor/unbalance error - Check motor and load distribution
- dE/OE: Door/open error - Verify door latch mechanism
- SE/CE: Sensor/communication error - Diagnose sensor network
Service Downloads
Current Model Service Manuals
WF45T6000AW
4.5 cu.ft. Washer Dryer Combo
WF50A8600AV
5.0 cu.ft. Smart Combo
WF53A8700AP
5.3 cu.ft. AddWash Combo
WF56A9100AP
5.6 cu.ft. Bespoke Combo
Previous Generation Models
WF45K6500AV
4.5 cu.ft. FlexWash Combo
WF50K7500AV
5.0 cu.ft. Steam Combo
WF42H5000AW
4.2 cu.ft. Standard Combo
WF39J5500AW
3.9 cu.ft. Compact Combo